SHE230G-PET Preform Injection Molding Machine
Series :PET Products Injection Molding Machine
Applications :For making PET Preform
SANSHUN Machinery is one of the top 10 Chinese injection molding machinery manufacturer. We are manufacturing different types of injection molding machines, injection blow molding machine, and Auxiliary equipment. Our machines had been exported to more than 60 countries.
Sanshun Machinery offers Special series of Injection Molding Machines for PET Preform making. PET Special screw highly increases the plasticizing speed and shot weight, lowers the plasticizing temperature and AA value, also achieves better products. Pressure Synchronization System with pressure holding and charge at same time gives the productivity improvement 15%-25%. The Preform which produced by our PET Preform Injection molding machine can stand temperature over 100 degree. With high strength, good transparency and low production costs. Beside an obvious energy saving due to a lower PET melting temperature, preforms by compression require less heating in the blowing phase because the crystals of material are differently oriented.
Heat Transfer systems, environmental, low noise, quick response, high-efficiency, high-speed automation, stable weight consistency, low power consumption, full automation of the process
|Screw L/D ratio||L/D||23.5||23||22.5|
|Space between tie-bars||mm||535X533|
|Max. pump pressure||MPa||16|
|Pump motor power||KW||25||31.5||31.5|
Advantages & Features