LED Bulb Fully Automatic Production Line

Series :Injection Blow Molding Machine

Brand :SANSHUN

Model :IBM650DP

Applications :For making LED Lamp

SANSHUN Machinery is one of the top 10 Chinese injection molding machinery manufacturer. We are manufacturing different types of injection molding machines, injection blow molding machine, and Auxiliary equipment. Our machines had been exported to more than 60 countries.

Characteristics
SANSHUN injection blow molding machine will be your best choice as The Injection Blow Molding process incorporates three basic stages: plastic is injected into a mold to create a plastic cylinder; that plastic cylinder is blown into a mold to form a hollow part; and then that form is ejected. During this process, air is used to form the hollow plastic shape by forcing the soft plastic into the mold’s cavity. Though described here in simplified terms, this outlines the general method of the injection blow molding process. In injection blow molding the part is formed in an enclosed mold, there is no scrap to be trimmed from the product. The three stations of the process allow for the formation of a thick treaded neck with a thin container wall

Advantages
Revolutionary and Innovative Technology, Versatile, environmental, quick response ,low noise, high-efficiency, Cost-Effective, Increased Production Methods, Exact Neck dimensions, No scrap, No trimming, No waste, Not much auxiliary equipment required

IBM大图.jpg


Technical Parameters


UNIT  IBM650DP
Screw diametermm42
Screw speedr/min0-200
Theoretical injection capacityml(gr)300(270)
Injection Clamping ForceKn650
Suitable Material PC
Blow Clamping Force KN85
Production Rate pcs/h600-1000
Air SupplyMpa1.8-3.0
Blowing Mouth Opening ForceKN12
Feed Rod Ejection Force KN10
Machine weightkg6000
Max.Neck Size&CavitityMax120mm 1cavtity
85mm 2cavtity
60mm 4cavtity
  55mm 6cavtity
  40mm 8cavtity
Max.Bottle Diametermm150mm 1cavtity
120mm 2cavtity
80mm 4cavtity
  70mm 6cavtity
  50mm 8cavtity
Diameter Of Machinem4.9x1.65x2.9

 

 

Advantages & Features

  • .With oil-electric servo pump system, the machine enjoys fast running response, low noise and low power consumption

  • .The turntable servo drive realizes fast accurate positioning and low energy consumption

  • .Special gas path structure secures the machine to run without aerodynamic noise

  • .Wheel clamping adopts the dual-cylinder moves during pressure boost. The machine runs with high speed, low power consumption and stable operation

  • .The mold structure without slider solves the problem of wear of the die block and realizes along die life

  • .With external cylinder opening the blowing mouth, the blowing mouth passage and the conduction oil passage are completely isolated, which eliminates the phenomenon of blowing of conduction oil. With the special sealing structure between the conduction oil and the core rod, no need to replace the core rod seal

  • .The easy-to disassemble mold structure enables the easy and quick replacement of a full set of mold

SEND INQUIRY